Seated Liberty/No Stars Half Dimes 1837-1838 Coin Guide
Back to Coin Encyclopedia Index
Seated Liberty/No Stars Half Dimes 1837-1838
1835 started off with a bang. On January 30th, an assailant fired two shots at President Andrew Jackson as he was leaving the House chamber. The shots missed. Ironically, a short time later, Samuel Colt patented his revolver. In early spring, Georgia passed the death penalty for anyone publishing anything that could incite slave rebellions. Abolitionists ranted, while most of the South approved. Lots of tension, lots of change.
Changes also led to the Mint becoming a very busy place. For the first time ever, there was a large amount of silver and gold available for use. New steam technology brought the introduction of modern, state-of-the-art coining presses which could strike coins quickly and efficiently in a close collar. These factors were instrumental in the Mint's entering the modern era.
Newly appointed Mint Director Robert M. Patterson had strong feelings about his own vision of the emblematic Liberty, and it didn't include portraits, as on the coinage to date. He favored the rendition of Britannia on the English copper coins and immediately assigned Chief Engraver William Kneass to do a sketch using a similar concept. Kneass' simple sketch was taken several steps further by the artists Titian Peale and Thomas Sully.
Enter Christian Gobrecht. By 1835 the talented engraver and medallist had worked for the Mint for over a decade, but without an official, permanent position. Among other assignments, he was responsible for many of the device punches that were used on the earlier Capped Bust coins. Finally appointed second engraver after Chief Engraver William Kneass' debilitating stroke in the summer of '35, Gobrecht immediately set to work on bringing Patterson's ideas and Sully's painting to life. The result was to grace the coinage for over half a century.
The Sully/Gobrecht Seated Liberty design was adapted for use on half dimes and dimes in 1837. It depicted a robed Liberty seated on a rock, holding in her right hand the Union Shield inscribed with LIBERTY and a staff topped with a Liberty cap in her left. Except for the date, the figure sits alone in clear fields. The reverse features a laurel wreath enclosing the denomination HALF DIME, with the legend UNITED STATES OF AMERICA encircling the periphery. As opposed to the later coins issued with obverse stars, the cleanness of the fields gave the coin a powerful, aesthetic impact, often presenting a cameo appearance on higher grade pieces.
On July 25, 1837 the first new half dimes were issued. About 20 or so proofs were struck for presentation to dignitaries and VIP's. Approximately 12-14 of these are known today, and they can be distinguished from business strikes by particularly bold detail and fully reflective surfaces. Additionally, all true proofs show very clear triple punching on the 8 in the date (this should not be regarded as diagnostic criteria for all proofs, though, since this feature is also seen on early die states of the business strikes).
A total of 1,405,000 Seated Liberty half dimes were struck in 1837. Two distinct varieties are known. The first has a large date with the date in a curved line and a tall peak to the 1 in the date. The second variety has a small date with the date in a straight line and a flat top to the 1 in the date. The Small Date is considerably scarcer than the Large Date, but virtually no premium is accorded to this variety. These 1837 No Stars half dimes, in comparison to other issues of the same era, are much more available in uncirculated grades than one might expect. Apparently, many pieces were saved as first-year-of-issue souvenirs.
In 1838, and for that year only, No Stars half dimes were coined in New Orleans. Some 70,000 pieces were struck, and these represent (along with the similarly dated dimes) the first regular issue silver coins struck at a United States branch mint. The 1838-O half dimes saw heavy circulation and are much rarer than the Philadelphia coins of 1837. Unlike many first-year-of-issue coins, virtually no one saved any pieces as souvenirs. As a result, mint state 1838-O half dimes are extremely rare and almost non-existent in grades higher than Mint State-63.
No Stars half dimes are very popular. Although very few collectors are still attempting to complete Seated Liberty date sets, higher grade No Stars examples have great eye appeal and are highly coveted by type collectors. From an artistic standpoint this coin is one of the most uncluttered coins ever struck in the United States. Due to the rarity of 1838-O, the 1837 issue is the one typically included in type sets.
When grading coins of this type, check the high points of the breast and knees on the obverse and the ribbon bow and tips of the leaves on the reverse. The 1838-O half dime is more difficult to grade. Many pieces were struck from heavily rusted dies. In addition to this die rust, the overall quality of strike was poor. These coins looked worn as soon as they left the die, and even a short stint in circulation left them with a wretched appearance. It is possible to find an 1838-O with minimal die rust and a reasonably decent impression, but they will never compare in overall appearance to the 1837 Philadelphia issues.
In 1838 an arc of thirteen stars (arranged seven to the left and six to the right) was added to the obverse of the half dime. The original hub of 1837 was retained, and the individual stars were hand-punched into each working die. This was done to quell criticism from those who took issue with the lack of the traditional stars signifying the original states.
Although a case could be made for the aesthetic appeal of the No Stars design, the issue was moot after the release of the 1838 Seated Liberty quarter dollar with stars on its obverse. Both the half dime and dime design were then changed to conform to the Mint's policy of similar designs on all coins of the same metal. Christian Go-brecht's majestic depiction of Liberty, however, would continue on the half dime until 1873, when Congress stopped production of the tiny silver five-cent piece in favor of the increasingly popular copper-nickel five-cent piece.
Diameter: 15.5 millimeters Weight: 1.34 grams Composition: .900 silver, .100 copper Edge: Reeded Net Weight: .03877 oz. pure silver
BIBLIOGRAPHY: Breen, Walter, United States Half Dimes: A Supplement, New York, 1958. Blythe, Al, The Complete Guide To Liberty Seated Half Dimes, Virginia Beach, VA, 1992. Morris, Richard B., Encyclopedia of American History, 5th Edition, Harper & Row, New York, 1976. Taxay, Don, The U.S. Mint and Coinage, Arco Publishing Co., New York, 1966. Valentine, Daniel W., The United States Half Dimes, Quarterman Publications, Inc., Lawrence, MA, 1975.
Coin Information Provided Courtesy NGC.